RSQ RW-4002U UHF Dual Channel Wireless Microphone

The receiver unit, features with quartz controlled fixed frequency UHF high band, is compatible with our wireless microphone series for dual or multi channels use. This series applies tone code squelch design to avoid interference from outside signal and noise. Sound frequency signal is mixed from both channels, then output through AF output jack.

Specification

Frequency Range: UHF 400~500 MHZ

Frequency Stability: ¡¾0.005% quartz oscillation controlled, with temperature stabilizer.

Modulation (Max): ?5KHZ.

Frequency Response: 50Hz~18KHz¡¾3dB.

Hum & Noise: 100dB min.

Dynamic Range: 100dB min.

Distortion: less than 0.5%.

Transmitter

Antenna: built-in with noise terminator circuit.

Battery: DC9V.

Current Consumption: 20mA.

Power Output: 30mW

Spurious Emission: 45dB min.

Reciever

Quartz controlled fixed frequency receiving mode.

Sensitivity: 10dB/ u V (S/N 60dB).

Image and Spurious Rejection: min 80dB.

Output: unbalanced 0.1V 600U; balanced 0.1V 600U.

Receiver System: dual channels.

Power Source: DC12V 500mA.

Dimensions: (L) 43* (W) 21*(H)4.5 CM.